Lehekülje D-Link G122 Rev C lähteteksti vaatamine

===D-Link G122 C1===
D-Link G122 on siis USB wifi pulk. Vanematel versioonidel on Ralink rt2570 chipset, kuid C1-l on Ralink RT73.
==Driverid==
Esmalt tuleb tõmmata uued draiverid:
 wget http://rt2x00.serialmonkey.com/rt73-cvs-daily.tar.gz
Siis
 sudo rmmod rt73usb
Nüüd tuleb vanad driverid blacklistida
 gksu gedit /etc/modprobe.d/blacklist
Faili lisada
 blacklist rt73usb
 blacklist rt2570
 blacklist rt2x00lib
==Mooduli ettevalmistus==
 sudo rm -R /etc/Wireless/RT73STA
Installida kõik vajaminevad pakid
 sudo apt-get install build-essential linux-headers-`uname -r`
==Kompilleerimine==
Esmalt draiverid lahti pakkida
  cd
 tar -xvf rt73-cvs-daily.tar.gz
Ja siis kompilleerida
 cd rt73-cvs-*
 cd Module
 make
 strip -S rt73.ko
 sudo make install
Install
sudo modprobe rt73
==Ühendumine teatud võrguga startupil==
Selleks tuleb muuta /etc/network/interfaces faili
 gksudo gedit /etc/network/interfaces
'''WPA''' jaoks on selline:
 auto wlan0
 iface wlan0 inet static
 address 192.168.1.2
 netmask 255.255.255.0
 network 192.168.1.0
 gateway 192.168.1.1
         pre-up ifconfig wlan0 up
 #imposta l'essid della rete
         pre-up iwconfig wlan0 essid "VÕRGUNIMI"
         pre-up iwconfig wlan0 mode Managed
 #imposta il canale della tua rete:
         pre-up iwconfig wlan0 channel 8
         pre-up iwpriv wlan0 set AuthMode=WPAPSK
         pre-up iwpriv wlan0 set EncrypType=TKIP
 #qui inserisci la tua chiave wpa-psk
         pre-up iwpriv wlan0 set WPAPSK="KOOD"
         pre-up iwpriv wlan0 set SSID="VÕRGUNIMI"
'''WEP''' jaoks
 auto wlan0
 iface wlan0 inet static
 address 192.168.1.2
 netmask 255.255.255.0
 network 192.168.1.0
 gateway 192.168.1.1
         pre-up ifconfig wlan0 up
 #imposta l'essid della rete
         pre-up iwconfig wlan0 essid "VÕRGUNIMI"
         pre-up iwconfig wlan0 mode Managed
 #imposta il canale della tua rete:
         pre-up iwconfig wlan0 channel 8
         pre-up iwpriv wlan0 set AuthMode=WEPAUTO
         pre-up iwpriv wlan0 set EncrypType=WEP
 #qui inserisci la tua chiave wep
         pre-up iwpriv wlan0 set Key1="KOOD"
         pre-up iwpriv wlan0 set SSID="VÕRGUNIMI"