Compal JHL90: erinevus redaktsioonide vahel

Allikas: Pingviini viki
Mine navigeerimisribaleMine otsikasti
← Vanem muudatus
Kaar3l (arutelu | kaastöö)
102 muudatust
Kaar3l (arutelu | kaastöö)
102 muudatust
Resümee puudub
 
(ei näidata sama kasutaja 23 vahepealset redaktsiooni)
1. rida: 1. rida:
Compal JHL90
Compal JHL90


Ubuntu 8.10 kasutusel.
Ubuntu 10.04 kasutusel.


lspci väljund:
lspci väljund:
31. rida: 31. rida:
  1a:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller
  1a:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller
  1a:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller
  1a:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller
lsusb:
Bus 002 Device 003: ID 064e:a115 Suyin Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 147e:1000 
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


==Töötavad ja mittetöötavad seadmed==
==Töötavad ja mittetöötavad seadmed==
66. rida: 77. rida:
|-
|-
![[Veebikaamera]]
![[Veebikaamera]]
|{{jah}}
|{{ei}}
|{{ei}}
|{{jah}}
|{{ei}}
|{{ei}}
|-
|-
91. rida: 102. rida:
|-
|-
![[Wifi BT lülitus]]
![[Wifi BT lülitus]]
|{{jah}}
|{{ei}}
|{{ei}}
|{{jah}}
|{{ei}}
|{{ei}}
|-
|-
103. rida: 114. rida:


==Videokaart==
==Videokaart==
185 seeria driveri compize jooksutamine on juba väga hea.
ftp://download.nvidia.com/XFree86/Linux-x86/
ftp://download.nvidia.com/XFree86/Linux-x86/
295.20 on väga stabiilne driver.
Installimiseks:
Installimiseks:
Tõmba home kataloogi uus driver.
Tõmba home kataloogi uus driver.
110. rida: 121. rida:
Teeme driveri käivitatavaks
Teeme driveri käivitatavaks
  chmod +x ./NVIDIA*
  chmod +x ./NVIDIA*
killime gdmi
Vajutage Ctrl+Alt+F1 ja killime gdmi
  sudo /etc/init.d/gdm stop
  sudo /etc/init.d/gdm stop
käivitame
käivitame
  sudo ./NVIDIA*
  sudo ./NVIDIA*
rm ./NVIDIA*
seejärel on lihtne arvutile restart teha
  sudo /etc/init.d/gdm start
  sudo reboot


==Sõrmejäljelugeja==
==Sõrmejäljelugeja==
Õpetus võetud siit:
Kasutada seda repot:
http://rvshiro.wordpress.com/2009/01/14/fingerprinting-under-ubuntu-810-on-asus-n10jc/
https://launchpad.net/~fingerprint/+archive/fingerprint-gui


1)Kõigepealt tõmba endale Fingerprint-GUI viimane versioon siit:
http://www.pdfserver.net/fingerprint/index.php
2)Siis
tar -zxvf ./fingerpintGUI-0.5.tar.gz
cd ./fingerprint-0.5
sudo ./install.sh –with-upek
3)Sul peab olema gdm logimis aken
cat /etc/X11/default-display-manager
Kui väljundiks on “/usr/sbin/gdm”, siis on kõik hästi
4)Ära kasuta logimisaknana nägudega varianti, vaid lihtsalt nimelist. Autologimine peab olema maha võetud.
sudo gdmsetup
Sealt ei tohi olla automaatse logimise ees linnukest.
5)Seejärel:
sudo cp /etc/pam.d/common-auth /etc/pam.d/common-auth-no-fingerprint
6)Siis muuda "auth  requisite  pam_nologin.so" -> "# auth  requisite  pam_nologin.so"
sudo gedit /etc/pam.d/gdm
7)Seejärel lisa failis esimeseks reaks "auth  sufficient  libpam_fingerprint.so debug"
sudo gedit /etc/pam.d/common-auth
8)Siis muuda "@include common-auth" -> "@include common-auth-no-fingerprint"
sudo gedit /etc/pam.d/polkit
9)Muuda rida "@include common-auth" to "@include common-auth-no-fingerprint"
sudo gedit /etc/pam.d/gnome-screensaver
10)Kui näed seal sellist numbrit, siis on kõik hästi: 147e:1000
lsusb
11)Eelmises punktis jäta meelde busi väärtus ning sisesta siia xxx-i asemele:
sudo chmod 777 /dev/bus/usb/xxx -R
12)Käivita System -> Preference -> Fingerprint GUI
Vali sealt Upek (0x147e) unknown device (0x1000)
Siis edasi on juba Next ja saabki hakata näppe scannima. Järgmisel sisse logimisel tahab juba gdm su käest näpujälge. :)
==Wireless Select Switch==
==Wireless Select Switch==
Programmi deb faili saad siit:
Compal-laptop moodul on juba kernelis sees, seega pole vaja kompilleerida.
http://krzemin.iglu.cz/software/compal-laptop-control-en
Kuna compal-laptopi moodulit on muudetud, siis endam compal-laptop-control ei tööta.
Peale installi
 
gksu gedit /etc/modules
Üks töötav lahendus on installida aircraft-manager programm, mis on mõeldid dellile, kuid töötab vist pea iga arvutiga.
Sinna lisa
https://launchpad.net/~opensource-subakutty/+archive/ppa/+packages
compal-laptop force=1
Nüüd sisesta:
sudo chmod +s /usr/bin/compal-laptop-control
Ja saab startup programmidesse lisada
compal-laptop-control
Et see täielikult töötaks ilma sudo-t kasutamata on vaja sisestada käsud:
chmod 666 /sys/devices/platform/compal-laptop/bluetooth
chmod 666 /sys/devices/platform/compal-laptop/wlan
If you're using compal-laptop >= 0.2.6
chmod 666 /sys/class/backlight/compal-laptop/brightness
Or optionally, if you're using kernel >= 2.6.28
chmod 666 /sys/class/backlight/acpi_video0/brightness
If you're using compal-laptop >= 0.2.9
chmod 666 /sys/devices/platform/compal-laptop/charging_level

Viimane redaktsioon: 14. märts 2012, kell 15:54

Compal JHL90

Ubuntu 10.04 kasutusel.

lspci väljund: 

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 9600M GT (rev a1)
0e:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
14:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
1a:00.0 System peripheral: JMicron Technologies, Inc. SD/MMC Host Controller
1a:00.2 SD Host controller: JMicron Technologies, Inc. Standard SD Host Controller
1a:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller
1a:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller

lsusb: 

Bus 002 Device 003: ID 064e:a115 Suyin Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 147e:1000  
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Töötavad ja mittetöötavad seadmed

Töötab kohe Vajab driveri installi Ei tööta
Wifi kaart Jah Ei Ei
Võrgukaart Jah Ei Ei
Videokaart Ei Jah Ei
Helikaart Jah Ei Ei
Bluetooth Jah Ei Ei
Veebikaamera Jah Ei Ei
Mälukaardi lugeja Jah Ei Ei
Suspend Jah Ei Ei
Hibernate Jah Ei Ei
Fn+ Jah Ei Ei
Wifi BT lülitus Jah Ei Ei
Sõrmejälje lugeja Ei Jah Ei

Videokaart

ftp://download.nvidia.com/XFree86/Linux-x86/ 295.20 on väga stabiilne driver. Installimiseks: Tõmba home kataloogi uus driver. 

sudo apt-get install build-essential linux-headers-`uname -r`

Teeme driveri käivitatavaks 

chmod +x ./NVIDIA*

Vajutage Ctrl+Alt+F1 ja killime gdmi 

sudo /etc/init.d/gdm stop

käivitame 

sudo ./NVIDIA*

seejärel on lihtne arvutile restart teha 

sudo reboot

Sõrmejäljelugeja

Kasutada seda repot: https://launchpad.net/~fingerprint/+archive/fingerprint-gui

Wireless Select Switch

Compal-laptop moodul on juba kernelis sees, seega pole vaja kompilleerida. Kuna compal-laptopi moodulit on muudetud, siis endam compal-laptop-control ei tööta.

Üks töötav lahendus on installida aircraft-manager programm, mis on mõeldid dellile, kuid töötab vist pea iga arvutiga. https://launchpad.net/~opensource-subakutty/+archive/ppa/+packages

Pärit leheküljelt "https://viki.pingviin.org/index.php?title=Compal_JHL90&oldid=9178"