Compal JHL90

Allikas: Pingviini viki
Redaktsioon seisuga 13. oktoober 2009, kell 20:50 kasutajalt Kaar3l (arutelu | kaastöö)
Mine navigeerimisribaleMine otsikasti

Compal JHL90

Ubuntu 9.04 kasutusel.

lspci väljund: 

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 9600M GT (rev a1)
0e:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
14:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
1a:00.0 System peripheral: JMicron Technologies, Inc. SD/MMC Host Controller
1a:00.2 SD Host controller: JMicron Technologies, Inc. Standard SD Host Controller
1a:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller
1a:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller

lsusb: 

Bus 002 Device 003: ID 064e:a115 Suyin Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 147e:1000  
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Töötavad ja mittetöötavad seadmed

Töötab kohe Vajab driveri installi Ei tööta
Wifi kaart Jah Ei Ei
Võrgukaart Jah Ei Ei
Videokaart Ei Jah Ei
Helikaart Jah Ei Ei
Bluetooth Jah Ei Ei
Veebikaamera Jah Ei Ei
Mälukaardi lugeja Jah Ei Ei
Suspend Jah Ei Ei
Hibernate Jah Ei Ei
Fn+ Jah Ei Ei
Wifi BT lülitus Ei Jah Ei
Sõrmejälje lugeja Ei Jah Ei

Videokaart

185 seeria driveri compize jooksutamine on juba väga hea. ftp://download.nvidia.com/XFree86/Linux-x86/ Installimiseks: Tõmba home kataloogi uus driver. 

sudo apt-get install build-essential linux-headers-`uname -r`

Teeme driveri käivitatavaks 

chmod +x ./NVIDIA*

Vajutage Ctrl+Alt+F1 ja killime gdmi 

sudo /etc/init.d/gdm stop

käivitame 

sudo ./NVIDIA*

seejärel on lihtne arvutile restart teha 

sudo reboot

Sõrmejäljelugeja

Õpetus võetud siit: http://rvshiro.wordpress.com/2009/01/14/fingerprinting-under-ubuntu-810-on-asus-n10jc/

1)Kõigepealt tõmba endale Fingerprint-GUI viimane versioon siit: http://www.pdfserver.net/fingerprint/index.php 2)Siis 

tar -zxvf ./fingerpintGUI-0.5.tar.gz
cd ./fingerprint-0.5
sudo ./install.sh –with-upek

3)Sul peab olema gdm logimis aken 

cat /etc/X11/default-display-manager

Kui väljundiks on “/usr/sbin/gdm”, siis on kõik hästi 4)Ära kasuta logimisaknana nägudega varianti, vaid lihtsalt nimelist. Autologimine peab olema maha võetud. 

sudo gdmsetup

Sealt ei tohi olla automaatse logimise ees linnukest. 5)Seejärel: 

sudo cp /etc/pam.d/common-auth /etc/pam.d/common-auth-no-fingerprint

6)Siis muuda "auth requisite pam_nologin.so" -> "# auth requisite pam_nologin.so" 

sudo gedit /etc/pam.d/gdm

7)Seejärel lisa failis esimeseks reaks "auth sufficient libpam_fingerprint.so debug" 

sudo gedit /etc/pam.d/common-auth

8)Siis muuda "@include common-auth" -> "@include common-auth-no-fingerprint" 

sudo gedit /etc/pam.d/polkit

9)Muuda rida "@include common-auth" to "@include common-auth-no-fingerprint" 

sudo gedit /etc/pam.d/gnome-screensaver

10)Kui näed seal sellist numbrit, siis on kõik hästi: 147e:1000 lsusb 11)Eelmises punktis jäta meelde busi väärtus ning sisesta siia xxx-i asemele: 

sudo chmod 777 /dev/bus/usb/xxx -R

12)Käivita System -> Preference -> Fingerprint GUI Vali sealt Upek (0x147e) unknown device (0x1000) Siis edasi on juba Next ja saabki hakata näppe scannima. Järgmisel sisse logimisel tahab juba gdm su käest näpujälge. :)

Wireless Select Switch

Parim on compal-laptop moodul eraldi kompilleerida Source failid leiab siit: http://eko.one.pl/index.php?page=compal-laptop Seejärel teha 

make

Ja siis 

Sudo make install

Siis tuleb installida deb fail, selle leiab siit: http://krzemin.iglu.cz/software/compal-laptop-control-en Peale installi 

gksu gedit /etc/modules

Sinna lisa selline rida 

compal-laptop

Nüüd sisesta: 

sudo chmod +s /usr/bin/compal-laptop-control

Ja saab startup programmidesse lisada 

compal-laptop-control

Et see täielikult töötaks ilma sudo-t kasutamata on vaja laadimisel käivitada käsud: Need on kõige lihtsam lisada rc.local-isse: 

gksu gedit /etc/rc.local

Sinna lisada need read 

chmod 666 /sys/devices/platform/compal-laptop/bluetooth
chmod 666 /sys/devices/platform/compal-laptop/wlan
chmod 666 /sys/class/backlight/acpi_video0/brightness
chmod 666 /sys/devices/platform/compal-laptop/charging_level

Touchpad

Touchpadi ei tundnud korralikult ära ning pidin ise confima: 

gksu gedit /etc/X11/xorg.conf

Seal lisada Section "ServerLayout"-i alla: 

InputDevice    "Synaptics Touchpad"

Section "Module" all peaks ka olema: 

Load           "synaptics"

Siis Section "InputDevice"-i all on mul selline asi. Vasak ülemine nurk on hiire rullikule vajutus ja parem ülemine serv on parem klikk. Parem äär kerib ka lehte alla. 

Section "InputDevice"
    Identifier     "Synaptics Touchpad"
    Driver         "synaptics"
    Option         "SendCoreEvents" "true"
    Option         "Device" "/dev/psaux"
    Option         "Protocol" "auto-dev"
    Option         "LeftEdge" "130"
    Option         "RightEdge" "860"
    Option         "TopEdge" "130"
    Option         "BottomEdge" "640"
    Option         "VertEdgeScroll" "1"
    Option         "SpecialScrollAreaRight" "1"
    Option         "VertScrollDelta" "60"
    Option         "MinSpeed" "0.35"
    Option         "MaxSpeed" "0.60"
    Option         "AccelFactor" "0.03"
    Option         "GuestMouseOff" "0"
    Option         "TapButton1" "1"
    Option         "TapButton2" "2"
    Option         "TapButton3" "3"
    Option         "RTCornerButton" "3"
    Option         "LTCornerButton" "2"
    Option 	   "SHMConfig" "on"
EndSection

Mälukaardi lugeja

Millegipärast 9.04-s mälukaardi lugeja ei taha töötada. Õpetus võetud siit: http://filthypants.blogspot.com/2009/03/ubuntu-904-jaunty-jackalope-on-acer.html 

sudo gedit /etc/modprobe.d/options

Sinna lisada selline asi: 

options sdhci debug_quirks=1
Pärit leheküljelt "https://viki.pingviin.org/index.php?title=Compal_JHL90&oldid=6759"